+86-311-86685003 sanso@hftubemills.com

Direct forming mill to square pipe

Description

Direct forming mill to square pipe/ Square Welded Tube Machine

The production of square/rectangular pipes adopts the combined roller.. The roller position will be adjusted by spacer and motor adjustment to realize one set of roller to apply for different size of pipe.

Direct square and rectangular pipe mill feature:

1.Position of roller will be adjusted automatically by motor. And roller can be shared with different size, so time and labor is saved when changing size.

2 Multipoint preflex assembled forming roller design technology, flexible Cold Roll Forming, high quality product, low roller loss.

3. AC motor drives individually, which is higher effective lower energy consumption and maintenance cost.

4. Perfect shape of the tube, the R Angle maintain uniform.

Model Square & Rectangle Pipe Opening Cold Forming

Steel

Speed (m/min)
Diameter(mm) Thickness (mm)
LW400 □100 40×40~100×100 1.5~5.0 The Same Specifications 20~60
LW600 □150 50×50~150×150 2.0~6.0 10~45
LW800 □200 80×80~200×200 3.0~10.0 10~35
LW1000 □250 100×100~250×250 4.0~12.0 10~35
LW1200 □300 150×150~300×300 4.0~14.0 10~30
LW1400 □350 200×200~350×350 4.0~16.0 10~30
LW1600 □400 250×250~400×400 6.0~18.0 6~20
LW2000 □500 300×300~500×500 8.0~20.0 6~20

Note : The line is non-standard products and can be produced according to user requirements, parameters sheet for reference only.



  • Please prove you are human by selecting the Flag.