+86-311-86685003 sanso@hftubemills.com

Φ32 Pipe production line

Category:

Description

I. Summary

The mill is used to manufacture of round pipe of Φ8mm-Φ32mm with thickness of 0.5mm-2.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.

Finished product will be of round, square or rectangular pipe.

II. Process flow:

{Steel strip}→→ Double-head un-coiler →→Shear and welder→→Horizontal accumulator→→Forming mill→→HF solid state welding→→Cooling→→Burr removing→→Sizing and Turks head→→Cutting saw →→ Run-out table
III. Technical parameter:
1. Pipe diameter: Ø8- Ø32mm
Pipe Thickness: 0.5mm-2.5mm
2. Square & Rectangle pipe: 10X10-25x25mm
Pipe Thickness: 0.4mm-1.5mm
3. Pipe Length: 4-12m
4. Length Tolerance: 0-6mm

5.Line speed: Max 150m/min



  • Please prove you are human by selecting the House.